In situ dendrite reinforced Bulk Metallic Glass matrix composites (BMGCs) are known to overcome poor ductility and fracture response exhibited by monolithic bulk metallic glasses (BMGs). In this paper (Shear fracture in bulk metallic glass composites) recently published by our group in Acta Materialia, we report mode I and mode II fracture experiments on the above in situ BMGCs containing transforming and non-transforming dendrites.
Monolithic Bulk Metallic Glasses (BMGs) exhibit strain softening or elastic-perfectly plastic response under uniaxial loading. However, shape memory alloy particle reinforced BMG matrix composites show strong work hardening in experiments. In our recent paper published in Scripta Materialia, we explain the Mechanistic origins of work hardening in shape memory alloy particle reinforced ex-situ bulk metallic glass matrix composites through three dimensional finite element simulations.
A few years ago, we observed Wallner Lines on the fracture surface of a brittle Bulk Metallic Glass and explained the process of formation of nanocorrugations on the fracture surface.
We published our research in Acta Materialia in the paper: 'Wallner lines, crack velocity and mechanisms of fracture in a brittle bulk metallic glass'.
I hope the experimental fracture mechanicians would particularly enjoy reading this paper and find it useful in their research.
A few years ago we published a paper in Acta Materialia elucidating the mechanism and length scales in the ductile fracture of bulk metallic glass through experiments and finite element simulations.
The link to the paper is here: 'On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass'.
I hope you enjoy reading the paper and find it useful in your research.
There is a shortage of literature on mode III fracture behaviour of bulk metallic glasses.
In our following research paper published in Acta Materialia, we report our experiments and three-dimensional elasto-plastic finite element simulations of tension-torsion loading on notched ductile bulk metallic glass bars.
It is found that fracture toughness of this BMG is lowest in mode II among all three fracture modes.
Bulk Metallic Glasses were found to exhibit an intermediate temperature minimum in ductility. Does it also lead to an intermediate temperature minimum in fracture toughness?
Porous Bulk Metallic Glasses have been invented by researchers to mitigate catastrophic failure in monolithic Bulk Metallic Glasses which are susceptible to intense strain localization into shear bands.
