Skip to main content

ABAQUS

Fully Coupled Fluid-Structure Interaction Analysis of Wind Turbine Rotor Blades-2012

Submitted by SIMULIA on
finite element analysis
ABAQUS
FEA
Multiphysics
SIMULIA
A fully coupled fluid-structure interaction analysis of a wind turbine rotor is
presented. Abaqus/Standard and STAR-CCM+ are directly coupled through the
SIMULIA co-simulation engine. With this approach, a high fidelity modeling
strategy can be used to develop an accurate understanding of the blade dynamics.

Simulation of the Ballistic Perforation of Aluminum Plates with Abaqus/Explicit -2012

Submitted by SIMULIA on
finite element analysis
ABAQUS
FEA
Multiphysics
SIMULIA
Simulation of the Ballistic Perforation of Aluminum Plates describes Abaqus/Explicit modeling of the ballistic impact of metal projectiles
on metal targets. It will demonstrate the utility of Abaqus/Explicit as a tool
for reducing the amount of experimental testing as well as assessing the
projectile residual velocities and time-resolved kinematics. 

Pipeline Rupture in Abaqus/Standard with Ductile Failure Initiation-2012

Submitted by SIMULIA on
finite element analysis
ABAQUS
FEA
Multiphysics
SIMULIA
Pipeline Rupture in Abaqus/Standard will be used to predict the burst pressure of a steel pipe-line
with a notch-type defect. A ductile damage initiation criterion is used, and
favorable comparison with available experimental data will be shown.

Coupled Electromagnetic and Fluid-Structure Interaction Analysis of a Solenoid Valve-2012

Submitted by SIMULIA on
finite element analysis
ABAQUS
FEA
Multiphysics
SIMULIA
It is a methodology for building a coupled electromagnetic and fluid-structure
interaction analysis of a solenoid valve. A seamless integration between the
applicable analysis techniques allows for the simulation of the complex
multiphysics interactions.

Simulation of the Ballistic Perforation of Aluminum Plates with Abaqus/Explicit - 2012

Submitted by SIMULIA on
software
ABAQUS
Kinematics
Abaqus/Explicit
SIMULIA
This Technology Brief describes Abaqus/Explicit
modeling of the ballistic impact of metal projectiles on metal targets.
It will demonstrate the utility of Abaqus/Explicit as a tool for
reducing the amount of experimental testing as well as assessing the
projectile residual velocities and time-resolved kinematics. 

ABAQUS - Contact between a 2D axisymmetric deformable body with an analytical rigid surface

Submitted by jack_luk on
ABAQUS
compression
contact
input file
interaction module
surface-to-surface

Hello,



I'm trying to figure out how the Interaction Module (surface-to-surface contact) in ABAQUS works. I want to apply a compression force on a 2D axisymmetric

deformable body via an analytical rigid surface(2D and axisymmetric also) - basic stuff. When I launch my simulations,

I get the good strains and stresses at the surface of the body which is in contact with the analytical rigid. Moreover, the reaction

forces and displacement of the analytical surface are adequate.

strain dependent shear modulus

Submitted by Ehsanizadi_civil on
software
ABAQUS
strain dependent shear modulus

Hi all,

I want to model a soil body which its shear modulus changes with the deviatoric strain.I know it can be introduced in ABAQUS by field variables (defining a field variable). But the question is that how can I tell ABAQUS that the defined variable is the "deviatoric strain" ? 

Thank you beforehand.

Ehsan 

Frequency analysis with Contact constraint

Submitted by sidd04mech on
education
ABAQUS
friction
contact
frequency analysis

Hi,

 

I am trying to analysis a model in ABAQUS with a plate bolted to the Bracket top surface at 4 ends. I have to define contact between them (and also bolted at 4 ends) to get the Modal frequency. But When I searched for it, I got the answer that contact doesn't work with Modal analysis as contact is a nonliner problem and Modal Analysis only solves linear problem.

 

Subscribe to ABAQUS