conferences/seminars related to energetic composite materials
The conferences/seminars I attended that relate to the behaviour of energetic composite materials.
conference
The 8th International Symposium on Fusion Nuclear Technology (ISFNT-8), Heidelberg, Germany (Sep-Oct, 2007)
The 8th International Symposium on Fusion Nuclear Technology (ISFNT-8) will be held in Heidelberg, Germany, from 30th September to 5th October, 2007.
The Symposium will focus on all technical aspects of fusion nuclear technology (FNT) and other related disciplines...
Topics:
- First Wall Technology and High Heat Flux Components
- Blanket Technology
- Fuel Cycle and Tritium Processing
- Material Engineering for FNT
- Vacuum Vessel
- Nuclear System Design and Reactor Studies
- Safety Issues and Waste Management
- Models and Experiments for FNT
- Repair and Maintenance
- Burning Plasma Control and Operation
- Inertial Confinement Fusion Studies and Technologies
- FNT Contributions to other Fields of Science and Technology
The 13th International Conference on Fusion Reactor Materials, Nice, France (Dec, 2007)
ICFRM is the major international conference for exchanging and archiving knowledge on the development of materials for both near and long-term fusion energy systems. It assembles the world community to present their results on research, development, and deployment of materials for fusion devices. The scope of the conference ranges from fundamental materials science to in-service materials performance, and is delivered in a mix of invited and contributed oral and poster presentations.
Second International Conference on Mechanics of Biomaterials and Tissues
Abstracts are due April 27, 2007 for the Second International Conference on Mechanics of Biomaterials and Tissues, to take place on the Hawai’ian island of Kaua’i. Full call for papers is at the conference website. The conference is hosted by Elsevier and the launch of a new Elsevier journal on biomechanics will coincide with the timing of the meeting. (The official journal website is here.)
Symposium: Plasticity and Damage Size Effects at the Micron and Nano Length Scales
The SES 2007 Conference, Oct. 21-24, 2007, Texas A&M University campus in College Station, Texas, home to the George Bush Presidential Library and Museum.
Symposium: Plasticity and Damage Size Effects at the Micron and Nano Length Scales
Symposium on "Mechanics of Nanofabrication and Nanostructure Growth" at the 2007 IMECE (ASME Meeting)
(Please also refer to node/711 for the introduction of this ASME meeting and some important changes. )
Mechanics has been playing a critical role in understanding the fabrication and reliability of nanostructured material systems, such as the self-assembly of quantum dots during heteroepitaxial thin film growth. Sponsored by the Elasticity Committee of Applied Mechanics Division, this symposium will identify opportunities and challenges in mechanics of materials that are motivated from a variety of novel and emerging nanofabrication and nanostructure growth methods. Presentations in experimental, theoretical, and computational studies are solicited in the following areas (but not limited to):
Symposium on Nanoscale, Biological, Cellular and Nonlinear Materials at the 2007 IMECE
The 2007 International Mechanical Engineering Congress and Exposition
November 11-16, 2007, Seattle, Washington, Sponsored by the Composites and Elasticity Committees, Applied Mechanics Division
Track 18-7 Nanoscale, Biological, Cellular and Nonlinear Materials
Symposium "Multiphysics behaviors of materials at the nanoscale" at USNCCM-09
The mechanical, thermal, electrical, and chemical behaviors of nanostructured materials such as nanocrystalline materials, nanowires, nanofilms, and nanotubes have been increasingly studied with advanced simulation techniques such as the molecular dynamics (MD) method and its various variants including the Car-Parrinello method, Monte Carlo method, the tight-binding MD method, and first principle methods. However, quite often the analyses neglect the correlations among the different types of behaviors of the materials. Characterization of such correlations necessitates multiphysics approaches in modeling, simulation, and experiments. Examples include fatigue of nanocrystalline materials in corrosive environments, piezoelectric behavior of nanowires, and thermal-mechanical coupling of the behavior of nanobelts. With advances in the development of nanomaterials, there is a strong need to quantify material behavior accounting for multiphysics processes in a coupled manner. This symposium is intended to bring together researchers in multiphysics modeling, simulation and experiments of nanomaterials and nanostructured materials. The focus is primarily on a survey of the state of the art in molecular level multiphysics modeling, simulation, and experiments. Presentations on method development, behavior characterization, atomistic description, and continuum representation are all strongly encouraged. (USNCCM website)
2007 ASME Congress, 12-15 November, Seattle, Washington
Deadline for submitting an abstract: 5 March 2007.
Responding to the wishes of members, the ASME Congress will change to a new format, starting this year. Sessions will not be allocated to Divisions, but will be allocated to symposiums after abstracts are reviewed. Thus, your action item is to submit an abstract to a symposium. Here are terms as used in the 2007 Congress:
Session. Technical sessions will be scheduled for four days, Monday-Thursday. Each session will last 90 minutes, and consists of 4-6 talks. There will be 23 parallell sessions at a given time, 5 time slots for sessions per day, and a total of 23x5x4 = 460 sessions for the entire congress.
International ECCOMAS Thematic Conference VipIMAGE 2007
International ECCOMAS Thematic Conference VipIMAGE 2007 - I ECCOMAS THEMATIC CONFERENCE ON COMPUTATIONAL VISION AND MEDICAL IMAGE PROCESSING
17-19th October 2007, FEUP, Porto, Portugal
Dear Colleague,
The International Conference VipIMAGE - I ECCOMAS THEMATIC CONFERENCE ON COMPUTATIONAL VISION AND MEDICAL IMAGE PROCESSING will be held in the Faculty of Engineering of University of Porto, Porto, Portugal, on October 17-19, 2007.