Blog posts

The carbon dioxide level within N95 respirator is higher than without it, which needs a mechanical explanation. In the current study, we built a three-dimensional (3D) model of normal human nasal cavity to simulate the volume of fraction of both fresh air and respired air within the nasal cavity. The model consists of large rectangular domain outside the nasal cavity representing ambient air, human nasal cavity and partial of the pharynx. Two cases were simulated. Case I refers to a human face with a N95 respirator onto human face, and case II refers to a human face without a respirator.

The conflict between the acoustical performance and ventilation efficiency in conventional noise barriers limits their application potentials in several settings. To address this challenge, we design and experimentally demonstrate a ventilated tunable acoustic metamaterial for noise mitigation at targeted frequencies. Through the structure, a peak normal incidence sound absorption coefficient of more than 0.96 at 1000 Hz and the peak normal incidence sound transmission loss of 18 dB is achieved while maintaining the air circulation with a 45% open area of ventilation.

By Yu Zhou and Lihua Jin

Digital Light Synthesis (DLS) technology creates ample opportunities for making 3D printed soft polymers for a wide range of grades and properties. In DLS, a 3D printer uses a continuous building technique in which the curing process is activated by an ultra-violet (UV) light. In this contribution, EUP40, a recently invented commercially available elastomeric polyurethane (EPU) printed by the DLS technology, is experimentally characterized.

I am learning crystal plasticity and its implementation as VUMAT subroutine from the book Nonlinear finite elements for continua and structure. I am aiming to gain more insight about the implementation by studying the poly-slip, rate-dependent, single crystal plasticity subroutine provided in the solution manual.

However, I couldn't reproduce the example in the book successfully, as I believe I have made errors in defining the material properties in the Abaqus input file. So, can someone please provide the input file for the associated VUMAT subroutine?