I used abaqus6.9 and intel fortran with UEL
The inp and fortran file is from http://web.utk.edu/~ygao7/publication.htm
Y.F. Gao*, A.F. Bower, "A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces." Modelling and Simulation in Materials Science and Engineering 12, 453-463, 2004
I encountered the 142 error code and don't know to deal with it.
Can someone help me?
Forums
Usually, error 142
Usually, error 142 means
a) divided by zero
b) using an array which is not declared before
c) array index out of the bounds
...
fracture;plasticity
Hello, the error has been
Hello,
the error has been discussed at length in the Yahoo group on ABAQUS
http://tech.groups.yahoo.com/group/Abaqus/
In brief: if you cannot find a bug then play around with the initial and/or maximum permissible time increment. Try decreasing and increasing and run a parameter study on that.
Good luck
Frank
------------------------------------------
Ruhr-University
Bochum
Germany