Effects of geometrical and mechanical properties of fiber and matrix on composite fracture toughness

Composites reinforced by thinner fibers are intensively studied in recent years and expected to have better
mechanical properties. With development of nanotechnology, the diameter of fiber can be as thin as
several nanometers, such as nanofibers and nanotubes. Then, do these thinner fibers definitely result in
composites with better mechanical properties? In this paper, the toughening effect of reinforcing fibers in
composites is investigated based on the three-level failure analysis model. It is found that thinner
reinforcing fibers do not definitely confer better fracture toughness on composites. The optimal fiber
diameter is that making the failure mode just in the transition from fiber pull-out to fiber break, which
is about 2–6 nm for carbon nanotubes and around 100 nm for carbon nanofibers. In addition, the effects
of fiber,matrix and interface properties are all investigated, and their analytical optimal values are obtained
and summarized in a table, which provides important reference for advanced composites design.

This paper could be found at: http://dx.doi.org/10.1016/j.compstruct.2014.12.011