You are here
Study on the use of motion compensation techniques to determine heat sources.Application to large deformations on cracked rubber
Dear colleagues, this paper deals with the determination of the thermal response of elastomeric materials subjected to cyclic loading. In this case, the material undergoes large deformations, so a suitable motion compensation technique has been developed to track the material points and their temperature during the test. Special attention is paid to the Narcissus effect and to the detector matrix of the infrared camera used in the study. Heat sources are then derived from the temperature maps. The thermoelastic inversion phenomenon has been experimentally evidenced during a cyclic test performed on an elastomeric notched specimen. The heat source distribution close to the crack tip has also been deduced from the temperature maps, thus highlighting the relevance of the approach. This article is accepted for publication in Experimental Mechanics and is available online at http://dx.doi.org/10.1007/s11340-008-9138-0
- LECAM's blog
- Log in or register to post comments
- 6056 reads
Comments
Re: Motion compensation techniques to determine heat sources
Dear LECAM,
Could you attach a preprint of the paper for those of us who don't have access to Experimental Mechanics?
Also, could you explain the Narcisus effect? A wikipedia search does not turn up anything useful, so perhaps you could add a wikipedia page on the effect.
-- Biswajit