Pullout force in Abaqus( NFORC3,RF3???)
To be precise this is what i am doing
I have 2 cylinders( which
would later be replaced by stent and hollow tube resembling artery) one
made of Nitinol and other made of Hyperelastic Material PDMS( material
properties are inputted)
The Outer diameter of the Inner cylinder is
7.5mm while in the Inner Diameter of the Outer cylinder is 7mm. The
Outer cylinder is Hyperelastic, Inner is Nitinol
These are my steps
Step1: Compression of Nitinol cylinder
Step2: